Posted By | Message |
FemmeOnFelt
Posts: 4
Joined: Dec 2020
|
Thursday, July 15, 2021 4:03 PM | |
First of all, I'm not sure if this is the correct place to inquire about this. I have what I believe to be the Bryce Drew #60 version of the President's List parallel SN10. I submitted front and back photos but received "Problem - Wrong Card" status. I am new here and I'm not sure if I did something wrong with the photo, but I'm fairly certain this is the correct card. The symbol on the front with the serial number is a little bit subtle with the darker shading of the card and the symbol itself. Please let me know if I should change something with the photo or if it's possibly not the right card after all. Thank you.
-------------------------------
|
|
|
|
RonEaston
Posts: 1,075
Joined: Nov 2019
|
Thursday, July 15, 2021 4:11 PM | |
Perhaps the answer is in your explanation...? The darkness may be a problem but also photos are not allowed...scans are needed only. If you have access to a scanner and have gone through the training on how to upload scans then perhaps that will fix it...pure speculation on my part.
-------------------------------
I'm mostly organizing over adding right now.
|
|
|
|
FemmeOnFelt
Posts: 4
Joined: Dec 2020
|
Thursday, July 15, 2021 4:17 PM | |
Sorry, they were scans. I should have said scans instead of photos. I submitted my first several card scans in the last couple of days and every other card was approved. Thank you though for the reply.
-------------------------------
|
|
|
|
FreehanSolo
Posts: 1,117
Joined: Nov 2017
|
Thursday, July 15, 2021 6:49 PM | |
Hmmm, your approved images look fine so it's unlikely the rejected ones were mistaken for photos. Once in a while someone accidentally misclicks and rejects or mismarks images, so it could be that. Can you please upload your images to this thread so maybe we can figure out what's going on?
|
|
|
|
FemmeOnFelt
Posts: 4
Joined: Dec 2020
|
Thursday, July 15, 2021 6:57 PM | |
-------------------------------
|
|
|
|
CollectorKing23
Posts: 577
Joined: Jun 2019
|
Thursday, July 15, 2021 7:12 PM | |
I am no expert on the subject yet but I recently had a card that I submitted and was marked as incorrect card much like your own. However, I rescanned the card and submitted it again and it was accepted this time. Don't know exactly what had happened so maybe something like this occured with yours as well. Hopefully it gets resolved for you soon.
-------------------------------
Matt Kenseth card collection is nearing 50% with over 2300 different cards. Always looking for the missing remainders to get to 100% completion.
|
|
|
|
FreehanSolo
Posts: 1,117
Joined: Nov 2017
|
Thursday, July 15, 2021 7:35 PM | |
I don't know anything about the set but your image looks like the examples found on COMC, so like CollectorKing23 suggested, I'd say go ahead and submit the images again and they should get accepted (unless someone that knows more about this parallel chimes in and can point out something being wrong with them).
|
|
|
|
FemmeOnFelt
Posts: 4
Joined: Dec 2020
|
Friday, July 16, 2021 12:15 PM | |
Thank you for the feedback. I re-submitted the scans and they were approved.
-------------------------------
|
|
|
|
SunDevilCollection
Posts: 1,745
Joined: Jul 2015
|
Friday, July 16, 2021 12:41 PM | |
|
|
|
|
goreds00
Posts: 111
Joined: Jul 2015
|
Friday, July 16, 2021 1:12 PM | |
Why are these sets numbered with a "P" before the number.
If I was trying to identify my card I would have just filtered for card 60 and not P60
|
|
|
|